腾冲火山及周边地区双差层析成像          下载免费PDF全文

华雨淋  吕彦 《地球物理学报》2019,62(8):2982-2990

利用云南腾冲火山地区15个固定台站记录到的7923次地震的P波到时资料，采用双差层析成像方法，反演得到腾冲火山及周边地区地壳及上地幔顶部三维P波速度结构和地震重定位结果.研究发现，腾冲火山区域地壳内存在明显的地震波低速区，P波速度低于整个区域地壳速度平均值超过15%，上地幔顶部存在规模较大的低速异常区.推测腾冲火山地区存在较大规模的地幔热物质上涌以及向地壳的侵入，热物质在地壳内以岩浆囊形式存储，并且壳内岩浆囊之间可能存在岩浆通道.通过联合反演获得的地震重定位结果显示，丛集地震位置更加集中，其展布特征与断裂构造具有显著的对应关系，表明研究区域断裂构造比较活跃.获得的高分辨率三维P波层析成像结果，为进一步认识火山地区岩浆存储特征以及地震分布与区域构造之间的关系提供了新的地震学依据.  相似文献   

BDS卫星差分码偏差稳定性分析及其短期预报     

梅登奎  闻德保 《大地测量与地球动力学》2020,40(7):746-750

利用MGEX(multi-GNSS experiment)发布的BDS卫星差分码偏差(differential code bias, DCB)产品，比较分析不同太阳活动水平下BDS卫星DCB产品的稳定性变化特性，并采用差分自回归移动平均(auto-regressive integrated moving average, ARIMA)时间序列预测模型，实现不同太阳活动水平下BDS卫星DCB的短期预报。结果表明，在太阳活动高年，BDS卫星DCB日解值稳定度、月稳定性均明显低于太阳活动低年，且不同卫星星座类型的BDS卫星DCB稳定性也存在差异；ARIMA时间序列预报结果与MGEX发布值符合程度较好，优于多项式拟合法预测结果。  相似文献   

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

基于偏微分方程的模型光滑处理在偏移成像中的应用          下载免费PDF全文

韩复兴  孙建国  王坤 《地球物理学报》2018,61(11):4558-4567

本文针对射线类偏移成像当中的速度模型光滑处理问题，借鉴数字图像处理当中的偏微分方程法，基于能量泛函，应用变分方法导出基于速度模型的偏微分方程实现射线类偏移成像当中的速度模型的光滑处理.由于偏微分方程法具有线性叠加特性、模型解的唯一性和局部特征保持性，因此，应用该算法可以实现基于原始速度模型空间结构的模型光滑处理.通过在原始速度模型以及光滑处理后的速度模型上计算速度的空间分布以及地震波走时、射线路径可以得出，偏微分方程法对速度模型的光滑处理能够很好地保持原始模型的空间结构，偏移成像结果也证明了该方法的实用性.  相似文献   

Seafloor Geomorphology and Processes on the Western Continental Margin of India based on Multibeam Acoustic Backscatter Data Analysis     

Sumanta Dandapath  Andrew Menezes  Bishwajit Chakraborty  John Kurian  Koppella N. Prudhvi Raju 《Marine Geodesy》2018,41(2):177-200

An assessment of the multibeam sonar data of the central Western Continental Margins of India has been carried out to evaluate the seafloor geomorphology and processes by examining the geomorphological attributes e.g., slope, sediments, structures, etc. associated with geomorphic features. The variation in relief and the features located in the region have been mapped and interpreted collectively by utilizing several geospatial mapping tools. The backscatter strength across the area, apparently congruent with the local relief, has helped to examine the sediment movement on the seafloor. The prominent features found in the region include faults, pockmarks, mounds, submarine terraces, and submerged fossil reefs. Several areas with varying topography engender comparable fractal dimension at short scale breaks, and the probability density functions (PDFs) utilizing backscatter data depicting overlapping classes. The present study highlights how fractals and scale break parameters can be utilized to determine the seafloor processes and associated sedimentological dynamics in a complex geographical environment with strong bottom currents, seasonal upwelling, and faulted structure. The role and impact of the various geomorphic processes on the reworking of sediment movement and the overall progression of the seafloor morphology has been revealed for the first time in this part of the ocean bottom.  相似文献   

Artificial recharge efficiency assessment by soil water balance and modelling approaches in a multi-layered vadose zone in a dry region     

Mojtaba Pakparvar  Hossein Hashemi  Meisam Rezaei  Wim M. Cornelis  Gholamali Nekooeian  Sayyed Ahang Kowsar 《水文科学杂志》2018,63(8):1183-1202

To assess recharge through floodwater spreading, three wells, approx. 30 m deep, were dug in a 35-year-old basin in southern Iran. Hydraulic parameters of the layers were measured. One well was equipped with pre-calibrated time domain reflectometry (TDR) sensors. The soil moisture was measured continuously before and after events. Rainfall, ponding depth and the duration of the flooding events were also measured. Recharge was assessed by the soil water balance method, and by calibrated (inverse solution) HYDRUS-1D. The results show that the 15 wetting front was interrupted at a layer with fine soil accumulation over a coarse layer at the depth of approx. 4 m. This seemed to occur due to fingering flow. Estimation of recharge by the soil water balance and modelling approaches showed a downward water flux of 55 and 57% of impounded floodwater, respectively.  相似文献   

基于D-InSAR技术的金沙江地区滑坡形变监测与分析     

齐麟  孔祥意  袁鑫  姜岩 《测绘与空间地理信息》2020,(2):175-177,181

滑坡是发生在我国山区的主要地质灾害类型,金沙江地区由于地势较高、地形复杂、多云多雨的特点,给传统的滑坡监测增加了难度。合成孔径雷达差分干涉测量技术(Differential interferometry synthetic aperture radar,D-InSAR)已在滑坡地面沉降监测中得到了广泛应用。本文选取金沙江上游沿岸作为研究区域,基于2018年8月11日与9月28日的Sentinel-1A影像及SRTM1数据,利用GAMMA软件及D-InSAR技术监测到金沙江地区的地表形变,成功识别出金沙江右岸的一处滑坡灾害。研究结果显示,在此滑坡的坡顶部分出现了约2.5 cm的沉降,而在坡底部分由于崩塌物的累积,地面出现了约3 cm的抬升。从实验结果可以得出,InSAR技术是一种有效的滑坡变形监测手段,利用Sentinel-1A卫星的SAR数据对滑坡区域进行形变监测,可以得到较好的干涉结果。  相似文献   

大别山及其周边现今垂直形变研究     

宋尚武  王庆良  郝明  周琳  刘立炜  胡亚轩 《大地测量与地球动力学》2018,38(1):32-35

基于1980年、2005年和2015年3期区域精密水准网观测资料，利用线性动态平差模型计算获取大别山地区水准网长期垂直运动速度场图像。研究发现，淮河平原地表下沉较为严重，大别山呈现弱隆升趋势运动，长江谷地边缘地区较大别山区呈现明显的隆升运动。跨郯庐断裂带水准剖面结果显示，垂直运动与地形呈负相关和弱相关。  相似文献   

2016年射阳M_S 4.4地震前后重力场变化     

吴晓峰  宋浩  代宪鹏  孙君嵩  张辉 《地震地磁观测与研究》2018,40(1):96-101

利用江苏重力测网2014-2017年重力场观测资料，采用绝对重力控制与相对重力联测相结合的平差方法，获取2016年射阳M_S 4.4地震前后重力场变化图。根据射阳M_S 4.4地震前后射阳地区各测线重力段差变化特点，绘制重力场等值线并进行对比分析，结合相关机理，探讨重力场变化与该地震的内在联系。同震观测数据显示：射阳M_S 4.4地震发生在重力异常值高梯度带附近，发震时震中地区位于NS挤压正异常、EW张拉负异常状态，震后区域重力梯度变化量开始减小，是一种典型的重力异常调整现象。  相似文献   

Cu–Mo Differential Mineralization Mechanism of the Dabate Polymetallic Deposit in Western Tianshan,NW China: Evidence from Geology,Fluid Inclusions,and Oxygen Isotope Systematics     

Rui Cao  Shengchao Yan  Bin Chen  Keke Sun  Qinglin Zhang  Haodong Gu 《Resource Geology》2020,70(1):50-69

Classic porphyry Cu–Mo deposits are mostly characterized by close temporal and spatial relationships between Cu and Mo mineralization. The northern Dabate Cu–Mo deposit is a newly discovered porphyry Cu–Mo polymetallic deposit in western Tianshan, northwest China. The Cu mineralization postdates the Mo mineralization and is located in shallower levels in the deposit, which is different from most classic porphyry Cu–Mo deposits. Detailed field investigations, together with microthermometry, laser Raman spectroscopy, and O‐isotope studies of fluid inclusions, were conducted to investigate the origin and evolution of ore‐forming fluids from the main Mo to main Cu stage of mineralization in the deposit. The results show that the ore‐forming fluids of the main Mo stage belonged to an NaCl + H₂O system of medium to high temperatures (280–310°C) and low salinities (2–4 wt% NaCl equivalent (eq.)), whereas that of the main Cu stage belonged to an F‐rich NaCl + CO₂ + H₂O system of medium to high temperatures (230–260°C) and medium to low salinities (4–10 wt% NaCl eq.). The δ¹⁸O values of the ore‐forming fluids decrease from 3.7–7.8‰ in the main Mo stage to ?7.5 to ?2.9‰ in the main Cu stage. These data indicate that the separation of Cu and Mo was closely related to a large‐scale vapor–brine separation of the early ore‐forming fluids, which produced the Mo‐bearing and Cu‐bearing fluids. Subsequently, the relatively reducing (CH₄‐rich) Mo‐bearing, ore‐forming fluids, dominantly of magmatic origin, caused mineralization in the rhyolite porphyry due to fluid boiling, whereas the relatively oxidizing (CO₂‐rich) Cu‐bearing, ore‐forming fluids mixed with meteoric water and precipitated chalcopyrite within the crushed zone at the contact between rhyolite porphyry and wall rock. We suggest that the separation of Cu and Mo in the deposit may be attributed to differences in the chemical properties of Cu and Mo, large‐scale vapor–brine separation of early ore‐forming fluids, and changes in oxygen fugacity.  相似文献